Begin construction and request inspections online using our Online Services.
Begin construction and request inspections online using our Online Services.
The documents required for submittal are:
Plan check is a process of which the plans are reviewed for compliance to current codes. For this program, the plans will be reviewed for compliance to the mandatory retrofit ordinance 183983 and 184081. Once plans have been reviewed and approved, permit can be issued.
All construction work for which a permit is required shall be subject to inspection by authorized inspectors. It is your responsibility to notify the inspector when the work is ready for inspection.
To request for inspection, please call (888) LA4Build or request for inspection online.
“ASHRAE Guideline 0.2-2015 Commissioning Process for Existing Systems and Assemblies”
requires the following items as part of Retro-Commissioning:
”ASHRAE Guideline 0.2-2015 Commissioning Process for Existing Systems and Assemblies” requires the following items as part of the Audit:
Remodeling of apartment buildings that were first occupied prior to March 13, 1991, are not subject to DA requirements.
Yes, as long as it does not obstruct controls, faucets, and shower spray units, or the transfer of an individual from wheelchairs onto shower seats.
Employee workstations must be on an accessible route.
No, but backing for future installation of grab bars is required.
Yes. Per 11B-505.4, handrail height must be a minimum of 34" and maximum of 38" measured vertically.
Yes, DA seating is required for each functional area.
Disabled access requirements apply to both temporary and permanent structures.
No, as this is not “newly constructed” according to LABC 202 or used for public housing.
Yes, the manager's unit needs to comply with the same DA requirements as the dwelling unit.
2% of the dwelling units. If parking is assigned, then 2% of the assigned parking spaces must be accessible. If unassigned, then a minimum of 5% of parking spaces must be accessible.
DA parking stalls must be provided in accordance with Table 11B-208.3.
Minimum 5% of the seating spaces for dining surfaces must be accessible and dispersed within other types of seating located in the functional area.