Electrical Test Lab (ETL)
The ETL evaluates electrical equipment for safety, fire and shock hazards and personnel injuries in accordance with the current applicable codes and standards. Approved materials are published as Los Angeles Research Reports (LARR).
Contact the
ETL
Electrical Testing Laboratory
Address: 221 N. Figueroa St. Room 500, Los Angeles, CA 90012
Telephone: (213) 482-6721 Fax: (213) 482-6554
Engineer: Antonio Maldonado
Email: antonio.maldonado@lacity.org Telephone: (213) 482-7382
Engineer: Isaac Almaraz
Email: isaac.almaraz@lacity.org Telephone: (213) 482-0035
Engineer: Stephanie Lopez
Email: stephanie.j.lopez@lacity.org Telephone: (213) 482-0068
Additional Resources
Find Building Permit-related PDFs and forms here. For more options, visit our Forms and Publications page.
- FAQ
- Forms & Applications
- Publication & Rosters
FAQ Search Results
Filtered categories:
All
A Certificate of Occupancy is not required for a Tenant Improvement project unless the permit is for a Change of Use.
Was this helpful?
A grading permit may be required depending on the scope of the project. Permits are almost always required in the Hillside Grading Area. Please contact the Grading Division.
Was this helpful?
Any time you alter, repair, add, relocate, or modify existing electrical wiring, you will need an electrical permit. Refer to section 93.0201 for a list of exceptions.
Was this helpful?
An elevator permit is not required for a car lift within an auto repair garage, as the Los Angeles City elevator code does not apply to car lifts per the City of Los Angeles Elevator Code Section 92.0103.
Was this helpful?
An inspection card is not required for any Electrical or Mechanical permits.
Was this helpful?
A recreation room and/or an Accessory Living Quarters are required to observe setbacks from the property line per Section 12.21.C.5 of L.A.M.C.
Was this helpful?
Yes, if the installation involves a (1) communication circuit or class 2 signaling circuit over 30 volts or under 30 volts but more than 100 va, (2) amplifier circuits not using class 2 or 3 wiring, or (3) any circuit operating over 15 volts that control, generate, transmit, transform, or utilize more than 25 watts or va. See section 93.0202 for more details.
Was this helpful?
A permit is not required for any type of fence under 3'6" in height.
A permit is required for a masonry or concrete fence over 3'6" in height, and for a fence of any other material over 10'0" in height.
Please note that even though a permit may not be required, all fences must comply with the requirements of the LA Zoning Code.
Was this helpful?
No, when done as part of the City's "Water Conservation Retrofit Program" pursuant to the City's Water Conservation regulations.
However, a non owner-occupied single family dwelling requires a permit obtained by a licensed plumbing contractor.
Was this helpful?
You will need a plan check when the scope of work involves items under code section 93.0206.
Was this helpful?
Filtered categories:
Filtered categories: